Approved_users, bureaucrat, administrator
1,956
edits
| As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com. |
Changes
Created page with "The "GLITCH" port is used for voltage glitching. It's connected to two MOSFET elements, as the following figure shows: <blockquote>image <..."
The "GLITCH" port is used for voltage glitching. It's connected to two MOSFET elements, as the following figure shows:
<blockquote>[[File:glitch_lp_hp.png|image]]
</blockquote>
The CW1173 glitch output can be commanded to turn on either of those MOSFETs via the "Glitch Out Enable" checkboxes:
<blockquote>[[File:glitch_gui.png|image]]
</blockquote>
Be careful using this feature, as you don't want to short the MOSFETs for too long. It's also possible to damage the ChipWhisperer-Lite by burning these MOSFETs up if used incorrectly. See tutorial #A3 for more information on using this feature.
<blockquote>[[File:glitch_lp_hp.png|image]]
</blockquote>
The CW1173 glitch output can be commanded to turn on either of those MOSFETs via the "Glitch Out Enable" checkboxes:
<blockquote>[[File:glitch_gui.png|image]]
</blockquote>
Be careful using this feature, as you don't want to short the MOSFETs for too long. It's also possible to damage the ChipWhisperer-Lite by burning these MOSFETs up if used incorrectly. See tutorial #A3 for more information on using this feature.
