| As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com. |
Difference between revisions of "CW505 Planar H-Field Probe"
From ChipWhisperer Wiki
| Line 3: | Line 3: | ||
== Usage == | == Usage == | ||
| + | The H-Probe can be mated with the LNA for the best performance. This is shown below: | ||
| + | [[File:hprobe_lna.jpg|400px]] | ||
| + | |||
| + | If using the H-Probe for SCA, you will need to place the probe on top of your target chip. For example see the following location used to attacked the XMEGA: | ||
| + | |||
| + | For more details, see the [[H Probe Usage]] tip which includes a video with details. | ||
== Design == | == Design == | ||
Revision as of 16:21, 9 April 2017
Usage
The H-Probe can be mated with the LNA for the best performance. This is shown below:
If using the H-Probe for SCA, you will need to place the probe on top of your target chip. For example see the following location used to attacked the XMEGA:
For more details, see the H Probe Usage tip which includes a video with details.
Design
The following shows all layers of the H-Field probe:
The following shows each individual layer:
Layer 1:
Layer 2:
Layer 3:
Layer 4:
