| As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com. |
Difference between revisions of "CW308T-EFM32GG11"
From ChipWhisperer Wiki
(Created page with "{{Infobox cw308target |name = CW308T-ADUCM3029 |image = SAM4L-Top-small.jpg |caption = |Target Device = Atmel SAM4L...") |
(Tag: VisualEditor) |
||
| Line 24: | Line 24: | ||
== Programming == | == Programming == | ||
| − | A serial bootloader is implemented on the Giant Gecko series of chips. Details for the use of this feature are described in Silicon Labs application note AN0042. | + | A serial bootloader is implemented on the Giant Gecko series of chips. Details for the use of this feature are described in Silicon Labs application note AN0042<ref>https://www.silabs.com/documents/public/application-notes/an0042-efm32-usb-uart-bootloader.pdf</ref>. |
== Schematic and Layout == | == Schematic and Layout == | ||
Revision as of 09:57, 22 August 2018
| CW308T-ADUCM3029 | |
|---|---|
 | |
| Target Device | Atmel SAM4L |
| Hardware Crypto | Yes |
| Design Files | OSH Park PCBs |
| Status | In Developement |
This board supports the Silicon Labs EFM32 Giant Gecko 11 microcontroller. The chip mounted on the target board is the EFM32GG11B1.
Power Supply
The core of the Giant Gecko chip runs from a 1.2v supply. This is supplied and filtered through the CW308T. The I/O buses are supplied with 3.3v.
Security Features
For a full list of security features see the product family data sheet[1]
Programming
A serial bootloader is implemented on the Giant Gecko series of chips. Details for the use of this feature are described in Silicon Labs application note AN0042[2].
Schematic and Layout
See GIT Repo for design files.
