As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com. |
Difference between revisions of "CW308T-XMEGA"
From ChipWhisperer Wiki
Line 7: | Line 7: | ||
|Hardware Crypto = Possible | |Hardware Crypto = Possible | ||
|Purchase Hardware = | |Purchase Hardware = | ||
− | |Design Files = [https://github.com/newaetech/chipwhisperer/tree/master/hardware/victims/cw308_ufo_target/ | + | |Design Files = [https://github.com/newaetech/chipwhisperer/tree/master/hardware/victims/cw308_ufo_target/xmega GITHub Link] |
− | [https://oshpark.com/shared_projects/jhjT2fUN | + | |
+ | [https://raw.githubusercontent.com/newaetech/chipwhisperer/master/hardware/victims/cw308_ufo_target/xmega/cw308t-xmega-bom-1click.tsv 1-Click BOM] | ||
+ | |||
+ | [https://oshpark.com/shared_projects/jhjT2fUN OSH Park PCBs] | ||
|Supported Applications = | |Supported Applications = | ||
}} | }} |
Revision as of 08:56, 2 April 2017
CW308T-XMEGA | |
---|---|
Target Device | Atmel XMEGA |
Target Architecture | 8-bit Harvard |
Hardware Crypto | Possible |
Design Files | OSH Park PCBs |
The CW308T-XMEGA fits an Atmel XMEGA device.
I/O Connections
CW308 Pin | ATXMega Pin | Notes |
---|---|---|
GPIO1 | PC3 (TXD0) | Serial OUTPUT from AVR. |
GPIO2 | PC2 (RXD0) | Serial INPUT to AVR. |
GPIO3 | PA1 | Spare pin. |
GPIO4 | PA0 | Trigger pin. |
CLKIN | XTAL1 | |
CLKFB | PB3 | Can output clock on this pin. Useful for synchronizing to internal RC oscillator. |
LED1 | PA5 | |
LED2 | PA6 | |
LED3 | PA7 | |
PDID | PDID | In-System programming. |
PDIC/nRST | nRST/PDIC | In-System programming. |
Hardware AES
The XMEGA device that ships with most standard boards is the ATXmega128D4-AU, the same device on the ChipWhisperer-Lite. This board does not contain hardware AES to simplify compliance with export rules.
The pin-compatible ATXmega128A4U-AU contains a hardware AES accelerator. If you wish to attack this device, you can purchase the blank CW308T-XMEGA PCB (or download gerbers from the GIT repository and make them yourselves) and mount the appropriate XMEGA device.
Programming Header
The 6-pin programming heading can be used with the Atmel PDI interface. The pinout of the 6-pin programming header on the main-board allows it to work with standard Atmel ISP tools: