CW308T-AVR
I/O Connections
The pinout of this module matches the "NOTDuino" kit along with the "CW301 Multi-Target Board" routing. The following is the connection between GPIO1-4 and the I/O lines on the AVR:
CW308 Pin | ATMega328P Pin | Notes |
---|---|---|
GPIO1 | PD0 (RXD) | Serial INPUT to AVR. |
GPIO2 | PD1 (TXD) | Serial OUTPUT from AVR. |
GPIO3 | N/C | |
GPIO4 | PC0 | Trigger pin (mapped to ADC-port such that I/O driver power comes from AVCC). |
CLKIN | XTAL1 | |
CLKFB | PB0 | Can set this pin as CLKO with fuse. Useful for synchronizing to internal RC oscillator. |
nRST | nRST (PC6) | Used by in-system-programming (ISP) interface. |
MOSI | PB3 (MOSI) | Used by in-system-programming (ISP) interface. |
MISO | PB4 (MISO) | Used by in-system-programming (ISP) interface. |
SCK | PB5 (SCK) | Used by in-system-programming (ISP) interface. |
Programming Header
The 6-pin programming heading can be used with the Atmel ISP interface. The pinout of the 6-pin programming header on the main-board allows it to work with standard Atmel ISP tools: