CW308T-LPC1343

CW308T-LPC1343
Target Device	NXP LPC1343
Hardware Crypto	Yes
Status	In Developement

This board supports the NXP LPC1343 microcontroller.

Power Supply

The core of the SAML11 chip runs from a 3.3v supply. This is supplied through the CW308T filter and delivered across a shunt resistor for power analysis. The I/O buses are also supplied with 3.3v.

Code Read Protection

The LPC13** family uses a code read protection feature to restrict access to application code after programming.

Programming

UART and USB bootloaders are supported on these devices.

Serial Wire Debug (SWD) is supported for programming and debugging applications.

Schematic and Layout

See GIT Repo for design files.

Hardware

Old Hardware (see RTFM.NEWAE.COM for new)

3rd Party Targets	SAKURA-G Target • SASEBO-W Target
Test Equipment	PicoScope (USB Scope) • VISA Connected Oscilloscope
Obsolete	CW1002 ChipWhisperer Capture Rev2 • CW301 Multi-Target