CW308T-D2000

CW308T-D2000
Target Device	Intel Quark D2000
Target Architecture	x86
Hardware Crypto	No
Design Files	GITHub link OSH Park PCBs

Programming

An external programmer is needed for this target. The Quark D2000 dev-board can be used with jumper wires, or a standard OpenOCD programmer can be used.

How to flash D2000 board using OpenOCD

TODO - TEMP

Start a command prompt C:\IntelSWTools\ISSM_2016.0.027\issm_env.bat gdb

target remote :3333 monitor clk32M 500 monitor load_image C:\\chipwhisperer\\hardware\\victims\\firmware\\intel_quark\\quark_d2000_rom.bin 0x0 monitor load_image C:\\chipwhisperer\\hardware\\victims\\firmware\\intel_quark\\simpleserial_example\\release\\quark_d2000\\x86\\bin\\simpleserial_aes.bin 0x00180000

cd %ISSM_DEBUGGER_ROOT%\openocd bin\openocd.exe -f scripts\board\quark_d2000.cfg

Schematic

See GIT Repo for PDF of schematic.

Board Layout

See GIT Repo for gerber files.

Old Hardware (see RTFM.NEWAE.COM for new)

3rd Party Targets	SAKURA-G Target • SASEBO-W Target
Test Equipment	PicoScope (USB Scope) • VISA Connected Oscilloscope
Obsolete	CW1002 ChipWhisperer Capture Rev2 • CW301 Multi-Target