CW502 Low Noise Amplifier

The LNA provides a simple amplifier for connecting equipment such as the H-Probe to the ChipWhisperer, or other devices such as oscilloscopes and spectrum analyzers. As the inputs are AC-coupled, it can also be used to amplify the signal from a resistive shunt for connection to a regular oscilloscope.

Power

The LNA requires a power supply of between 3.0 - 3.6V. This is supplied by the CW503 Probe Power Supply box, although you can also use a lab power supply or other source.

Typical Performance

The LNA is based on the BGA2801 device from NXP. See details in the BGA 2801 Datasheet. But a summary of important specifications are:

• 20 dB gain up to 2GHz.
• Typical 4 dB NF.
• 2 dBm maximum power output at 1 dB compression point.

The following shows an example of S21 and S11 parameters for the LNA:

Schematic

Hardware

Old Hardware (see RTFM.NEWAE.COM for new)

3rd Party Targets	SAKURA-G Target • SASEBO-W Target
Test Equipment	PicoScope (USB Scope) • VISA Connected Oscilloscope
Obsolete	CW1002 ChipWhisperer Capture Rev2 • CW301 Multi-Target