The CW1200 (ChipWhisperer Pro) is an upgraded version of the ChipWhisperer Lite capture hardware. The Pro includes an FPGA with much more space than the Lite, allowing many new features to be added, including a larger sample buffer, streaming-mode captures, additional trigger methods, and a touchscreen interface. These features make it a high-end device suitable for laboratory use.

Check out a sneak peek of the CW-Pro.

(TODO: picture of CW-Pro)

Power Supply

- 5 V power supply - Can't power from USB - Needs both connections - Recommend power supplies for high-power targets

Basic Usage

The basic features on the Pro are exactly the same as the ChipWhisperer Lite. This means that any scripts and tutorials made for the Lite will work on the Pro, too: the connectors and pinouts are exactly the same.

- AVR programmer - XMEGA programmer - Glitch - Measure - 20 pin - Smart card - Firmware upgrades

Advanced Features

Streaming Mode

SAD Trigger

UART/SPI Trigger

SMA I/O

Touchscreen

- Pictures of screens - Descriptions of displays

Old Hardware (see RTFM.NEWAE.COM for new)

3rd Party Targets	SAKURA-G Target • SASEBO-W Target
Test Equipment	PicoScope (USB Scope) • VISA Connected Oscilloscope
Obsolete	CW1002 ChipWhisperer Capture Rev2 • CW301 Multi-Target

CW1200 ChipWhisperer-Pro