CW308T-D2000
| CW308T-D2000 | |
|---|---|
 | |
| Target Device | Intel Quark D2000 |
| Target Architecture | x86 |
| Hardware Crypto | No |
| Design Files | OSH Park PCBs |
Programming
An external programmer is needed for this target. The Quark D2000 dev-board can be used with jumper wires, or a standard OpenOCD programmer can be used.
How to flash D2000 board using OpenOCD
TODO - TEMP
Start a command prompt C:\IntelSWTools\ISSM_2016.0.027\issm_env.bat gdb
target remote :3333 monitor clk32M 500 monitor load_image C:\\chipwhisperer\\hardware\\victims\\firmware\\intel_quark\\quark_d2000_rom.bin 0x0 monitor load_image C:\\chipwhisperer\\hardware\\victims\\firmware\\intel_quark\\simpleserial_example\\release\\quark_d2000\\x86\\bin\\simpleserial_aes.bin 0x00180000
cd %ISSM_DEBUGGER_ROOT%\openocd bin\openocd.exe -f scripts\board\quark_d2000.cfg
Schematic
See GIT Repo for PDF of schematic.
Board Layout
See GIT Repo for gerber files.