CW308T-EFM32TG11
Revision as of 09:39, 22 August 2018 by LCraig (Talk | contribs) (Created page with "{{Infobox cw308target |name = CW308T-ADUCM3029 |image = SAM4L-Top-small.jpg |caption = |Target Device = Atmel SAM4L...")
| CW308T-ADUCM3029 | |
|---|---|
 | |
| Target Device | Atmel SAM4L |
| Hardware Crypto | Yes |
| Design Files | OSH Park PCBs |
| Status | In Developement |
This board supports the Silicon Labs EFM32 Tiny Gecko 11 microcontroller. The chip mounted on the target board is the EMF32TG11B3.
Power Supply
The core of the Tiny Gecko chip runs from a 1.2v supply. This is supplied and filtered through the CW308T. The I/O buses are supplied with 3.3v.
Security Features
The Tiny Gecko family of microcontrollers implements many security features including:
For a full list of security features see the product family data sheet[1]
Programming
The SAML10/11 family implements a serial bootloader. Usage of this bootloader is not detailed in the data sheet, for usage information see Microchip Application note AN2699[2].
Serial Wire Debug (SWD) is also supported for programming and debugging applications.
Schematic and Layout
See GIT Repo for design files.