Open main menu

CW308T-S6LX9

Revision as of 17:30, 10 April 2017 by Coflynn (Talk | contribs)

Revision as of 17:30, 10 April 2017 by Coflynn (Talk | contribs)

Spartan6 target.jpg

Programming

The ChipWhisperer will eventually support programming this target. Until then, you will need an external programmer. This is connected via JTAG to the pin headers:

Xilinx jtag small.jpg

You can purchase clone JTAG programmers off AliExpress/E-Bay for low cost (search 'Xilinx JTAG').

Schematic

NOTE: Schematic is marked as unapproved until hardware has been fully validated.

See GIT Repo for PDF of schematic.

CW308T S6LX9 Schematic Page 1.png

CW308T S6LX9 Schematic Page 2.png

CW308T S6LX9 Schematic Page 3.png

Board Layout

See GIT Repo for gerber files.

Last modified on 29 July 2020, at 11:22